Best Black and Decker String Trimmer for Robot Mower Yards
7 min read · by Jordan Ellis · Updated
The best black and decker string trimmer depends on your yard, not on one model. Most of the brand’s cordless models use a 0.065-inch line, a few take 0.080-inch line, and the right pick depends on how much grass you cut, how close you trim to the robot mower’s boundary wire or edges, and whether you need an edger head. This guide shows what to compare as of Nov 2026.
The short answer
- For edging around a robot mower: a lightweight cordless model with an edger-capable head is usually enough.
- Check the line first: most cordless Black+Decker trimmers take 0.065-inch line, and some take 0.080-inch. Read the label or manual before you buy spool refills.
- Battery platform: pick the 20V MAX or 40V line based on the batteries you already own, not on the trimmer alone.
- Weight matters more than peak power for edging, because you hold the trimmer at the lawn edge for longer than you would for open-area trimming.
What to compare before you buy the best black and decker string trimmer
Most review pages sort trimmers by one number, but for a yard with a robot mower the useful checks are line diameter, cutting swath, shaft and head design, and battery platform. Each one changes how the trimmer works next to a mower’s path.
| Spec | Why it matters for edging | What to check |
|---|---|---|
| Line diameter | Wrong diameter reduces cutting performance and can overload the head. | Read the label or manual. Cordless models most often list 0.065 inch. |
| Cutting swath | A wider swath clears a strip faster but is harder to control near edges. | Compare the stated width in inches, not the marketing wording. |
| Head type | An edger-capable head lets you flip the trimmer for a clean vertical edge. | Look for an edger mode in the product description. |
| Battery platform | Shared batteries reduce the cost of adding tools later. | Confirm whether the battery is included or sold separately. |
The line diameter matters most. The product listings we checked for the replacement spools point to 0.065 inch for most cordless trimmers, with 0.080 inch available for some models. Because the number changes by model, our reading is that the label on the trimmer, or its manual, is the only reliable source for your exact unit.
How a string trimmer fits next to a robot mower
A robot mower handles the open lawn, but the edge along a fence, a flower bed, or a patio is where it struggles. That strip is what a string trimmer is for, so a black and decker string trimmer earns its place only if its head and battery suit the edges you actually have. Plan to trim the same strip every week or two so the mower’s path stays clean and the grass does not grow over the boundary. For a closely related angle, see our how a trimmer complements a robot mower as well.

Heads up
Keep the trimmer head below the height of the mower’s wheels and stay clear of the boundary wire. Cutting too low into soil or a garden edge can damage both the line and the mower’s sensors.
Cordless or corded for an edging job
Cordless trimmers are easier to move around a yard that already has a robot mower, because you do not have to manage an extension cord near a path the mower uses. A corded model can be fine for a small yard, but a cord running across the lawn is a trip hazard and can snag on the mower’s route. See our DeWalt versus Milwaukee trimmer matchup for further detail on a connected question. When you are ready for the next step, read our DeWalt trimmer lineup for lawn edges for more detail. The follow-up question most readers have is answered in our Milwaukee string trimmer selection notes.
- Count the edge length. Measure the total run of fences, beds and paths you need to trim.
- Match the battery. Confirm the trimmer’s battery platform and runtime against that length.
- Check the head. Make sure it has an edger mode if you want clean vertical lines.
- Buy spare line. Keep one spool that matches the diameter printed on your trimmer.
Which features to look for when choosing a black and decker string trimmer
If you read a black and decker string trimmer review, check whether the reviewer reports the line diameter, the battery used in testing, and the time spent on edging versus open trimming. A review that does not state these is hard to compare with other models. For the next step after this section, continue with our Makita string trimmer for lawn edges.
- Battery in the test: runtime changes with the pack, so note the Ah rating.
- Edge quality: a clean line along a bed is a better test than trimming tall grass in the open.
- Weight with battery: the figure matters more than the bare weight for a 20-minute job.

Maintenance that keeps the trimmer working
Clear the spool housing after each use, check that the line feeds freely, and replace worn line before it breaks in the head. Store the trimmer off the lawn, with the battery removed if you will not use it for a few weeks.
Common mistakes when buying a trimmer for edging
Most buyers in this situation make the same few mistakes. The first is buying on peak power and ignoring weight, even though an edging job means holding the trimmer at arm’s length along a bed for a long stretch. The second is choosing a battery platform by the trimmer’s price and then finding that a second tool on the same platform costs more than expected. The third is leaving the line choice for later, which often means the spool you buy does not match the head.
A fourth mistake, when hunting for the best black and decker string trimmer, is trimming the same edge too low in wet weather. Damp soil and fresh clippings make the line stick and can push the head into the ground. Our reading is that a steady, shallow pass each week is safer for both the trimmer and the mower’s boundary than one hard cut every few months.

Related reads: Related to this guide, you may also want to read our landscape edging that reduces hand trimming for a connected topic.
Frequently asked questions
Is a Black+Decker string trimmer good for edging around a robot mower?
Usually yes, for a small to medium yard. Choose a light cordless model with an edger head, and trim the same strip on a regular schedule so the mower’s path stays clean.
What line size does the best black and decker string trimmer use?
Most cordless models listed for replacement spools use 0.065-inch line, and some use 0.080-inch. Check the label or manual on your trimmer before buying line.
Should I buy a 20V or 40V Black+Decker trimmer?
Pick the platform that matches batteries you already own. Adding a second platform costs more than choosing one trimmer model, so check the battery price before the tool price.
Can a string trimmer damage a robot mower?
It can, if you trim too close to the mower, the boundary wire, or the charging station. Keep the head clear of the mower’s path and trim the edge on a clean, slow pass.
Sources
- Black+Decker RS-136 replacement trimmer line listing (manufacturer): used for the 0.065-inch line diameter reference. Listing seen in search results; page not opened.
- Lowe’s Black+Decker string trimmer line category (retailer): used for the 0.080-inch line option. Listing seen in search results; page not opened.
01Up next9 min readGearMakita String Trimmer Review for Robot Mower EdgesUpdated Nov 18, 2026
027 min readGearDeWalt vs Milwaukee String Trimmer: Which to BuyUpdated Nov 18, 2026
037 min readGearBest DeWalt String Trimmer for Robot Mower Edges in 2026Updated Nov 20, 2026
046 min readGearBest Ryobi String Trimmer for Robot Mower Edges in 2026Updated Nov 13, 2026
057 min readGearMilwaukee String Trimmer Review: Worth It? 5 Expert ChecksUpdated Nov 13, 2026
068 min readGearBest Cordless String Trimmer for Robot Mower Edges: How to ChooseUpdated Nov 13, 2026