Makita String Trimmer Review for Robot Mower Edges
9 min read · by Jordan Ellis · Updated
A Makita string trimmer review for robot mower owners starts with one job: finishing the edges the mower cannot reach. Robot mowers leave a strip of uncut grass along fences, flower beds, and the base of trees. Makita’s current 18V LXT string trimmer, the XRU24Z, is a telescoping trimmer with a 10-1/4 inch cutting swath and a head that turns 180 degrees to work as an edger. This guide explains what to look for, how the Makita models compare on the specs that matter, and how to fit a trimmer into a robot mower routine. Figures are as of Nov 2026 and come from manufacturer pages.
The short answer
- Best use with a robot mower: trimming the strip along fences, beds, and walls that the mower skips, then edging the lawn border.
- Makita XRU24Z: 18V LXT, 10-1/4 inch swath, 7,800 RPM no-load speed, telescoping shaft from 48-1/4 to 56-1/2 inches, and a 180 degree head that converts to an edger.
- Battery: the XRU24Z is sold tool only, so you need an 18V LXT battery. Makita lists up to 1 hour of runtime on a 4.0Ah battery.
- What to check first: in any makita string trimmer review, look at whether you need edging or only trimming, your reach over fences and beds, and whether your existing batteries match the platform.
What a string trimmer covers that a robot mower does not
A robot mower works best on open lawn. Its blades sit inside a housing that has to stay clear of walls, edging, and landscape timbers, so it always leaves a narrow margin. That margin grows where the mower’s boundary wire or guide sits a few inches from the obstacle. Over a season, the margin can turn into a visible ridge of tall grass around the lawn. Readers who want a broader overview can read our best cordless trimmers for robot mower edges first and then continue with this page. If this point matters for your setup, read our companion trimmer for robot mower edges for more detail on it.
A string trimmer cuts that margin with a spinning line instead of a blade housing, so it can reach into tight corners, under fence rails, and around posts. An edger is a related tool that uses a blade or a wheel to cut a clean vertical line where the grass meets a path or a bed. Many homeowners who run a robot mower use a trimmer for the margin and an edger for the crisp border.
Heads up
A trimmer does not replace a robot mower’s boundary setup. Keep the boundary wire or virtual boundary at the edge you want the mower to stop, then trim the margin beyond it.
Makita string trimmer review: models for lawn edges
Makita sells several cordless string trimmers across its 18V LXT, 18V X2, 12V CXT, and 40V max XGT platforms. Their specs vary by model, and some retailer listings do not match Makita’s own pages, so the table below uses the manufacturer’s product page or press release where one exists. When you are ready for the next step, read our DeWalt cordless trimmer specs for more detail. For a closely related angle, see our DeWalt and Milwaukee trimmer face-off as well.
| Model | Platform | Cutting swath or capacity | Edging use |
|---|---|---|---|
| XRU24Z | 18V LXT | 10-1/4 inch swath, 7,800 RPM no-load | Yes, 180 degree head converts to an edger (Makita) |
| XRU23SM1 kit | 18V LXT, 4.0Ah battery included | 13 inch trimmer, marketed for trimming and edging | Marketed for edging by Makita kit listings; check the head before buying |
| XRU08Z | 18V LXT curved shaft | 11-3/4 inch cutting capacity | Retailer review reports it does not take an edging blade |
| GRU01M1 | 40V max XGT | 15 inch class, heavier duty | Retailer listings position it as a gas trimmer replacement |
For a makita string trimmer review focused on edging, the XRU24Z is the model with the clearest manufacturer claim, so it is the one this guide uses as the main example. The other models suit trimming more than edging, and the curved shaft design on some of them limits the head options. Confirm the edging feature on the model’s current product page before you buy, because head accessories change between kits.

The XRU24Z edger head and what it means at the lawn edge
Makita’s 2023 release for the XRU24 describes the trimmer as “two tools in one,” with a head that rotates 180 degrees so the trimmer can work as an edger. Edging is the job most people skip with a string trimmer, yet it is the one that makes a robot-mowed lawn look finished. A trimmer head that stays on the line-cutting setting leaves a ragged edge, while an edger head gives a straight vertical cut along a path.
In this makita string trimmer review, the XRU24Z’s 10-1/4 inch swath is narrow compared with a full-size trimmer. That is a feature here, not a flaw: a narrower swath gives more control in tight spots like the gap between a robot mower’s charging station and a fence. The telescoping shaft, which runs from 48-1/4 to 56-1/2 inches according to Makita’s page, lets you adjust reach and keep your back straight along a long run.

How to choose a string trimmer to pair with a robot mower
Pick a string trimmer by the jobs you have, not by the biggest spec on the box. A makita string trimmer review should always check these points against your own yard. These are the points that matter most when the trimmer’s main work is the margin left by a robot mower. The follow-up question most readers have is answered in our Milwaukee string trimmer review.
- Edging or trimming: if you want a crisp border along paths and beds, pick a model whose head converts to an edger. If you only need the margin cut, a standard trimmer head is enough.
- Shaft length and weight: a telescoping shaft helps when you need a longer reach along fences and under shrubs. Makita’s page lists the XRU24Z at 5.6 lbs with its battery, which is light enough to use for a full edge run.
- Battery platform: if you already own 18V LXT batteries, a tool-only trimmer keeps the cost down. If you are starting from scratch, count the battery and charger as part of the total.
- Cutting swath: a wider swath covers more ground on long fence lines, but a narrower one is easier around obstacles. Match the swath to the widest gap your robot mower leaves.
- Head type and line feed: check how the bump-and-feed head loads line and how often you will need to reload it. Line that feeds easily saves time on a regular schedule.
A simple routine for trimmer and robot mower
Most homeowners do not need to trim every week. Our reading of the manufacturer guidance is that a trimmer is most useful once or twice a month during the growing season, when the margin along fences and beds starts to look untidy. The steps below keep the work short and the results consistent.
- Walk the margin first. Look for places where the robot mower’s boundary sits close to an obstacle and leaves a visible strip of tall grass.
- Trim before you edge. Cut the margin with the trimmer head, then switch to the edger head for the final line along any path or bed.
- Work with the grass dry. Wet grass clumps and makes an even cut harder, so schedule the trimming a few hours after the robot mower finishes or on a dry day.
- Keep the cutting head low. Angle the head so the line tips touch the grass from the side, not from above. Swinging too low can scuff the lawn edge and dig into the soil.
- Check the robot mower’s boundary afterward. If the trimmer reveals a spot where the mower always runs too close to an obstacle, adjust the boundary wire or zone instead of trimming the same margin every time.

Safety and maintenance basics
Trimmers throw debris, so wear eye protection and closed shoes, and clear stones, toys, and pet waste from the work area first. Keep hands away from the cutting head while the trimmer runs, and switch the tool off before you clear a jam or change the line. The line should be replaced when it is worn short, and the head should be cleaned after each session so grass does not build up and slow the spool.
Batteries also need care, and a makita string trimmer review should note that battery life affects how often you can edge in one session. Store them at room temperature and avoid leaving them on the charger for long periods in very hot or cold weather. Follow the battery and tool manuals for charging, storage, and cleaning, and check the manufacturer’s current guidance because cold storage and battery limits can change with the model.
Related reads: Related to this guide, you may also want to read our edging borders for robot mower lawns for a connected topic.
Frequently asked questions
Is a Makita string trimmer good for edging around a robot mower?
It can be, if the model has an edging head. Makita says the XRU24Z’s 180 degree head converts the trimmer into an edger, which suits the lawn edge a robot mower leaves. Confirm the edging feature on the current product page before you buy.
Which battery does the Makita XRU24Z use?
The XRU24Z runs on the 18V LXT platform. Makita sells it as a tool-only product, so you need a compatible 18V LXT battery. Makita lists up to 1 hour of runtime with a 4.0Ah battery.
How long is the telescoping shaft on the XRU24Z?
Makita’s product page lists the telescoping shaft as 48-1/4 to 56-1/2 inches. A longer shaft reaches under fences and shrubs more easily, but it also adds weight at the head.
Do I still need a trimmer if I have a robot mower?
Most owners still use one for the strip along fences, beds, and walls. A robot mower handles the open lawn well, but its housing and boundary setup leave a margin that a trimmer can cut in a few minutes.
Sources
- Makita XRU24Z 18V LXT String Trimmer, Tool Only (Makita): product specs for swath, RPM, shaft length, weight, and head type.
- Makita press release on the new cordless string trimmer (Makita): the 180 degree head and edger conversion claim.
01Up next7 min readGearMilwaukee String Trimmer Review: Worth It? 5 Expert ChecksUpdated Nov 13, 2026
027 min readGearBest DeWalt String Trimmer for Robot Mower Edges in 2026Updated Nov 20, 2026
036 min readGearBest Ryobi String Trimmer for Robot Mower Edges in 2026Updated Nov 13, 2026
048 min readGearBest Cordless String Trimmer for Robot Mower Edges: How to ChooseUpdated Nov 13, 2026
056 min readGearRobot Mower Lawn Edge Trimmer Companion Tool: How to ChooseUpdated Nov 20, 2026
067 min readGearBest Black and Decker String Trimmer for Robot Mower YardsUpdated Nov 18, 2026