Sunseeker Replacement Blades: What Fits, What to Check and When to Swap
7 min read · by Jordan Ellis · Updated
Sunseeker replacement blades must match your exact mower model. Length, center-hole pattern and series all differ, and Sunseeker lists its blades by model family. As of November 2026, the US S-series page lists a set of 12 blades with 12 matching screws for the S4.
The short answer
- Fit: check your exact model, because Sunseeker’s sets are listed for specific series.
- Material: the S-series set is made of high-carbon steel.
- Timing: brand guidance ranges from every 2 months to once per mowing season, so inspect often.
- Sharpening: Sunseeker Elite advises against it, citing imbalance.
What the official Sunseeker blade sets include
Sunseeker’s official sets come as 12 blades with 12 matching screws for the S4, or as 24-piece kits for the X4, X5, X7 and X9 families. The table compares the sets described on Sunseeker’s US and Elite pages. The S-series page is the only one we read that names a specific model for a set, and no prices are shown on the pages we read, so none are given here.
| Kit | Listed fit | Pieces | Material or note |
|---|---|---|---|
| S-series blade set | Sunseeker S4, “Compatible with Sunseeker Robotic Mower S series” | 12 blades, 12 screws | High-carbon steel |
| Standard blade kit | X4, X5, X7, X9 series “and more” | 24 | Not stated |
| Premium blade kit | Not stated | 24 | Hardened cutting edges |
The page also recommends “genuine Sunseeker accessories” for performance and lifespan. Read the Sunseeker S-series blade set page before you order if your mower is an S-series model.
How to check which Sunseeker replacement blades fit your model
Sunseeker’s replacement guide says blades must match your mower’s length, center-hole pattern and specifications. Confirm all three before you order, starting with the model number on your mower or in its manual.

The Elite collection page adds that robot mower blades are often model-specific, so check compatibility before you buy. A listing that does not name your exact model is a guess, in our reading.
- Confirm the exact model, not just the series name.
- Compare blade length, hole pattern and lift profile against your current blades. Sunseeker’s global robot-mower guide says all three must match the mower.
- Treat listings from other brands as unverified until the specs match.
Part numbers: what you can and cannot confirm
We found no official Sunseeker part number for the standard blades on the pages we read, so treat reseller part numbers as unconfirmed. The Elite collection page lists its kits without part numbers, and the third-party listings we saw are not Sunseeker-branded.
One retailer lists 16600901-01 as a blade disc for the X7 PLUS. That is a disc, not the individual blades, and we could not confirm it against Sunseeker’s own catalog. A third-party manual says an official spare parts catalog lists X5, X7 and X3 part numbers. We did not open that catalog, so check it, or contact Sunseeker support with your mower’s model name.
When to replace the set
Sunseeker’s pages give different intervals, from every 2 months on the S4 page to once per mowing season in its replacement guide. Treat the schedule as a range and inspect your Sunseeker replacement blades often. For a cross-brand view, see how long robot mower blades last.
| Sunseeker source | Guidance |
|---|---|
| S-series blade set page | Every 2 months for best cutting results and safety |
| When-to-replace article | Every 4 to 8 weeks in the growing season, and 8 to 10 weeks or more in dormancy |
| Global robot-mower replacement guide | Every 1 to 2 months as a general interval, and sooner if a blade is worn, bent, cracked or heavily chipped |
| Sunseeker Elite replacement guide (written for lawn mowers in general) | Once per mowing season, a fresh set at the start of spring, and an inspection every 25 hours of use |
As of November 2026, these are the brand’s own figures and not independent test data. Our reading is that a robot mower cutting often in peak season is closer to the shorter interval. A lightly used lawn can stretch toward the longer one. The Sunseeker Elite when-to-replace article sets out the seasonal reasoning.

Signs your blades need replacing
Replace the blades when more than a quarter of the cutting edge is visibly damaged or worn smooth, according to Sunseeker Elite’s replacement article. Check your Sunseeker replacement blades for these signs during each inspection:
- Large nicks on the cutting edge.
- Bending or warping, since a blade that is not flat cuts unevenly.
- Rust that pits the metal.
- Torn or brown grass tips, and uncut strips in the lawn.
- Slower cutting on slopes, or new vibration and humming.
Why replacing the set beats sharpening
Sunseeker Elite advises against sharpening, because a set is balanced as a unit and sharpening can throw that balance off. Our guide on sharpening or replacing robot mower blades weighs that choice in more detail.
In our reading, the saving from sharpening is rarely worth the risk of an unbalanced blade.
How to swap Sunseeker blades safely
Turn the mower off completely and place it upside down on a flat, stable surface before you touch a blade. Sunseeker’s global guide describes the robot mower steps below, so follow your own model’s manual for the final details. Our how to change Sunseeker blades guide covers the job in more depth.
- Turn the mower off. Switch it off completely before you start the replacement.
- Protect yourself. Wear protective gloves, as the S-series page says, and glasses, which the global guide also suggests.
- Turn it over. Place the mower upside down on a flat, stable surface.
- Line up the skid plate. Rotate it until the access hole aligns with the blade screw, then remove the screw, the skid plate and the old blade.
- Clean the disc. Wipe away grass clippings and dirt with a soft brush or damp cloth.
- Fit the new blade. Align it with the mounting hole, refit the skid plate and tighten the screw securely, without overtightening.
- Test. Return the mower to its normal position and run a short session to check that the blades spin and cut evenly.
Frequently asked questions
Do Sunseeker replacement blades fit every robot mower?
No. Sunseeker lists its sets for specific series, such as the S4 and the X4, X5, X7 and X9 families. Check your exact model number and blade layout before you order, because the Elite collection page notes that blades are often model-specific.
Are third-party replacement blades a safe alternative?
Sunseeker’s guidance recommends genuine accessories for performance and lifespan. Third-party listings are not Sunseeker-branded, so check the length, hole pattern and material against your current blades before you buy any sunseeker replacement blades from another brand. Without a confirmed match, the blade is a guess.
Can I sharpen Sunseeker blades instead of replacing them?
Sunseeker Elite advises against sharpening, citing the risk of imbalance. Its guidance says the blades are balanced as a set, so replacing the full set is the safer route for most owners.
Do I need gloves when swapping blades?
Yes. The Sunseeker S-series page says to always wear protective gloves when handling or replacing blades. Sunseeker’s global guide adds glasses to protect your eyes from dirt and metal fragments.
Sources
- Sunseeker S-series blade set (Sunseeker US): 12 blades and 12 screws, S4 fit, high-carbon steel, 2-month guidance and glove advice.
- Robot lawn mower blades collection (Sunseeker Elite): 24-piece kits for the X4, X5, X7 and X9 families, and the model-specific note.
- When to replace lawn mower blades (Sunseeker Elite): season intervals and the quarter-edge threshold.
- How to replace mower blade (Sunseeker Elite): fit checks, inspection interval, and the swap sequence.
- How to replace mower blade (Sunseeker global): robot-mower fit, power-off, skid plate and overtightening guidance.
01Up next7 min readGearRobot Mower Replacement Blades: What a Set Includes and When to SwapUpdated Nov 20, 2026
027 min readGearRobot Mower Wheel Replacement: When to Swap and What to CheckUpdated Nov 19, 2026
036 min readGearSunseeker Replacement Wheels: What Fits and What to CheckUpdated Nov 20, 2026
049 min readGearWorx Landroid Replacement Battery: Fit, Swap and 1-Year WarrantyUpdated Nov 19, 2026
057 min readGearHusqvarna Automower Replacement Blades: Part Numbers and Fit ChecksUpdated Nov 20, 2026
067 min readGearHow to Change Sunseeker Blades: Steps, Safety and Replacement TimingUpdated Nov 19, 2026