Mammotion Luba Spare Parts: Which Ones Wear Out and What Is Covered
7 min read · by Jordan Ellis · Updated
Mammotion Luba spare parts that wear out most often are the cutting blades and their screws. Mammotion’s own maintenance guidance says to replace the blades every 3 months or after 150 hours of use, and to change all blades and screws together. The company’s US after-sales page lists blades, cutting discs and tires as wearing parts, which are handled apart from the warranty period table.
The short answer
- Wear items: cutting blades, screws, cutting disc and tires, per Mammotion’s warranty page.
- Blade interval: every 3 months or 150 hours, sooner in heavy grass.
- Screws: single-use. Replace them with each new blade.
- Warranty: a repair or replacement does not restart the original warranty period.
- Before ordering: have your model and serial number ready, and use original blades approved by Mammotion.
Mammotion Luba spare parts that wear out
Wearing parts are components that are expected to lose condition through normal mowing. Mammotion’s US after-sales policy names cutting blades, cutting discs and tires as wearing parts. For these, the company’s stated remedy is a free replacement only if the defect comes from material or workmanship flaws, and the claim must be made within 30 days of purchase.
The same page lists the main Luba components under separate warranty rows. The LUBA 3 AWD battery is covered for 3 years (see our Mammotion Luba 3 battery life article for how long a charge lasts). Its motor, LiDAR vision module, PCBA, GPS kit, charging station and RTK reference station appear in a group without a period shown on the page read for this article. That gap matters: if a part is not listed with a period, do not assume it has one. Treat every other item as a non-wear part, and check the warranty table before you order Mammotion Luba spare parts for it.
How often to replace blades and screws
Mammotion’s support article on cutting blades and motor maintenance recommends replacing the cutting blades every 3 months or after 150 hours of use. Heavier grass may call for more frequent changes. The article is written for its robot mowers in general, so check the manual for your exact Luba model before you plan a schedule. Of all Mammotion Luba spare parts, blades and screws are the ones you will buy most often, and our Mammotion Luba blade change guide walks through the swap.
The screws follow the same rule. The article says to replace all blades and their screws at the same time, and it warns: “DO NOT reuse the screws, which may cause serious injury.” Our reading is that replacing a single blade and keeping the old screws goes against that guidance. Mammotion’s UK blade guide agrees: it says “NEVER use the old screws with new blades” because they are single-use, and it adds that blades that are too blunt “resist this pivot action, transferring the shock directly to the motor.” For a general view of timing, see our guide on how long robot mower blades last.

Fitting new blades without damage
The support article names the correct tools and steps. Use the Phillips screwdriver that comes with the robot. It warns: “DO NOT use an electrical screwdriver to tighten or loosen the cutting disc.” Wear protective gloves, turn the mower off, and place it upside down on a soft, clean surface. Avoid pressing the vision module while the mower is inverted.
Remove the old blades, install the new blades with the included washers and screws, and check that the blades rotate freely and are securely fitted.

What the warranty covers, and what it does not show
Warranty coverage on a spare part depends on the part type and the purchase date. Mammotion’s US page lists periods for some components, but not for every Luba part. Two rules apply across the page. First, the warranty claim has to be made within the period shown in the table. Second, if a defect was caused by a part that was modified without Mammotion’s consent, the claim is excluded. The page gives an example: replacing the Wheel Hub Motor yourself. Our reading is that the same exclusion would apply to Mammotion Luba spare parts that are swapped without the company’s consent, so use approved parts only.
| Part type | What the US page says |
|---|---|
| Cutting blades and screws | Wearing parts; replace every 3 months or 150 hours (support guidance) |
| Cutting disc and tires | Listed as wearing parts; free replacement only for defects within 30 days of purchase |
| LUBA 3 AWD battery | 3-year limited warranty |
| Motor, vision module, GPS kit, charging station, RTK base | Listed in the table; period not shown on the page read |

Claim requirements and replacement rules
To make a claim, Mammotion asks for valid proof of purchase, such as a sales receipt or invoice, showing the purchase date and the product’s serial number. Claims must be made within the warranty period in the table.
Replacement parts may be new or used, and they must be at least functionally equivalent to the part being replaced. The replacement item becomes the buyer’s property, and the replaced part becomes Mammotion’s. A repair or replacement does not extend or restart the warranty. The product keeps the remaining warranty period of the original.
Outside the warranty period, the page says you must state whether you will pay for materials, labor and shipping. If you do not, the product is returned without repair. Plan for that cost before you order Mammotion Luba spare parts outside the warranty period.
What to check before you order
Parts lists and part numbers differ by model and by region, and the page read for this article did not give a complete list of Mammotion Luba spare parts. Do not guess a part number. Instead, check these items before you buy:
- Model and serial number. The warranty claim needs the serial number, and the right blade set depends on the model.
- Original or approved parts. The support article says to use the correct screws and original blades approved by Mammotion.
- Blade count and set. Replace the whole set with its screws, not one blade.
- Your region’s after-sales page. Coverage and part availability vary by country, so the US, UK and Canada pages can differ.
Keeping the parts that matter in good shape
Mammotion Luba spare parts last longer when the mower stays dry and clean. Mammotion’s guidance says to keep the hub motor shaft dry and clean to prevent dirt and moisture buildup, and gives an expected motor lifespan of 1500 hours of operation. It also advises against mowing during heavy rain or when grass is very wet, because wet grass sticks to the blades and the underside of the mower.
Our reading is that keeping the charging area dry and sheltered is a sensible way to protect the mower’s electrical contacts as well. After mowing wet grass, wipe the underside and inspect the blades when you clean.
Frequently asked questions
Are Luba cutting blades covered by warranty?
Among Mammotion Luba spare parts, Mammotion’s US after-sales page lists cutting blades and discs as wearing parts. The stated remedy is a free replacement only for defects from material or workmanship flaws, claimed within 30 days of purchase.
How often should I replace the blades?
Mammotion’s support article recommends every 3 months or after 150 hours of use, with more frequent changes in heavier grass. Replace the screws at the same time.
Can I reuse the blade screws?
No. The support article says the screws are single-use and warns not to reuse them. Use a new screw with each new blade.
Do I need my serial number to claim a part?
Yes. The US after-sales page asks for proof of purchase with the purchase date and the serial number of the product.
Sources
- Mammotion US after-sales policy (Mammotion): warranty table, wearing parts, claim and replacement rules.
- How and When to Replace Your Robotic Lawn Mower Blades (Mammotion UK): single-use screws and the effect of blunt blades on the motor.
- Mammotion support: maintenance for cutting blades and motor (Mammotion): blade interval, screw rules, tools, motor lifespan.
01Up next7 min readGearMammotion Yuka Spare Parts: What Wears Out and What Is CoveredUpdated Nov 20, 2026
027 min readGearSegway Navimow Spare Parts: What Wears Out and When to ReplaceUpdated Nov 20, 2026
038 min readGearAnthbot Spare Parts: What to Keep On Hand and What Is CoveredUpdated Nov 20, 2026
048 min readGearMammotion YUKA Accessories Worth Buying: Wear Parts First, Extras SecondUpdated Nov 12, 2026
057 min readGearHusqvarna Automower Spare Parts: What Exists and Where to Buy Genuine OnesUpdated Nov 20, 2026
067 min readGearMammotion Luba Replacement Wheels: What to Check FirstUpdated Nov 19, 2026