How Much Does a Robot Mower Charging Station Cost to Replace?
7 min read · by Rachel Whitman · Updated
How much does a robot mower charging station cost to replace? It depends on the brand and part, and the only replacement price we could verify is EUR 485.00 (EUR 414.53 excluding VAT) for a Husqvarna OEM station, from a European reseller as of 2026-11-12. We could not verify a reliable US range from manufacturer sources, so treat any single number with care and check the part number for your exact model before you order.
The short answer
- One verified price: a Husqvarna OEM charging station assembly (part 576636712) is listed at EUR 485.00, or EUR 414.53 excluding VAT, by a reseller.
- No US range: the other listings we tried were blocked or missing, so we did not publish a range.
- Match the part number: stations differ by brand, model, and region (for example, EU vs North American versions).
- After a swap: reinstall the station in the app so the mower can find the new dock.
How much does a robot mower charging station cost to replace?
A replacement charging station is a separate part, not the mower, and its price depends on the brand and the exact model. The only fully verified price in our reading is a reseller listing for the Husqvarna charging station assembly, part 576636712. It shows EUR 485.00 with EUR 414.53 listed excluding VAT, which suggests the price includes VAT (the page does not say so directly). That is one listing from one reseller, not an official price list, so it shows an example, not a market average.
We also looked at listings from other brands, including Segway Navimow, Mammotion, and Worx. Those pages returned errors when we tried to read them, so we left their prices out rather than guess. Any figure you see from a search snippet should be confirmed on the seller’s page before you rely on it.
Why prices vary so much
Three things make a replacement quote hard to compare when you ask how much does a robot mower charging station cost to replace. First, the part is model-specific, so a station for one mower may not fit another. Second, buying from the manufacturer or an authorized dealer usually gives you the correct part number and warranty terms, while third-party sellers may list a different version. Third, prices in Europe include VAT and US prices usually do not, so a quoted euro figure is not directly comparable with a dollar quote.
Our reading is that the safest first step is to find the exact model and part number in your owner’s manual or the app, then request a quote for that number from an authorized dealer. That is the only reliable way to answer how much does a robot mower charging station cost to replace for your own mower.
When a replacement is the right fix
For wire-free (EPOS) installations, Husqvarna lists three reasons to reinstall the charging station: the station is moved to a new spot, the station is replaced with a new unit, or the mower cannot dock or connect to it. Those are the cases where a new station is the likely fix. A mower that cannot dock can also have a problem with the contacts, the power supply, or the boundary wire, so check those before you buy a part.
Our reading is that the cheapest first step is to rule out the small causes before you pay for a new station. Our guide to fixing a robot mower that is not charging lists them.

Reinstall the station in the app after a swap
On a wire-free (EPOS) Automower, a new station is only useful once the app knows where it is. Husqvarna’s reinstall article for EPOS wire-free installations gives these short Automower Connect steps, and we did not find a matching article for boundary-wire models:
- Check the station. Confirm it is at the correct location and properly connected.
- Open the map. In the Automower Connect app, go to the Map section.
- Reinstall. Select Charging station, then tap Reinstall and follow the prompts.
For these EPOS installations, Husqvarna also says reinstalling does not affect existing virtual boundaries. The app guides you to reconnect the existing transport paths to the new docking point. A new transport path is only needed if the station moves outside the work area. If pairing fails, turn off Bluetooth on nearby devices, because they can interfere.
Placement rules that affect a swap
A replacement often goes back in the same spot, so the placement rules matter as much as the price when you work out how much does a robot mower charging station cost to replace in total. Our guides to the robot mower charging station base plate and charging station anchor screws cover the fixing side. The Husqvarna placement guide sets clearances for a boundary-wire station, and its wire-free (EPOS) setup needs more space in front:
| Area | Minimum (Husqvarna guide) |
|---|---|
| Front, boundary-wire model | 3 m (about 10 ft) |
| Each side, boundary-wire model | 150 cm (about 60 in) |
| Rear, boundary-wire model | 60 cm (about 2 ft) |
| Front, EPOS wire-free model | 6 m (about 20 ft) |
The same guide says the station must sit on level ground, the baseplate must not be bent, and metal objects such as rebar or metal edging should be kept away. Mammotion’s installation guide adds that the station should be secured with the included ground stakes, or with expansion bolts on concrete, and warns that if the station moves even slightly, the mower may fail to dock. Worx’s Landroid Vision guide says to keep the station within 10 m of an AC outlet because the cable is 10 m long at most.

What to check before you order
Before you buy a replacement, confirm five things: the exact model and part number, whether your mower uses a boundary wire or wire-free navigation, the outlet distance and cable length, the anchoring method for your surface, and whether the seller is an authorized dealer. A matching part number and an authorized seller usually matter more than a small difference in price. If the problem is actually the pack, compare the robot mower battery replacement cost before you buy either part.
Frequently asked questions
Is a replacement charging station the same as a new one?
Usually it is the same part for the same model. Check the part number, because stations can differ by region and by mower generation.
Do I need to redo the boundary wire after a swap?
For Husqvarna EPOS wire-free installations, reinstalling in the app does not affect existing virtual boundaries, and a new transport path is needed only if the station moves outside the work area. We did not find equivalent guidance for boundary-wire models, so check your manual for how the wire loop connects to the new station.
What if the mower still will not dock after I replace the station?
Check that the station sits level, is secured, and has clear space in front. Mammotion warns that even a slight shift can stop docking, so re-anchor the station before you assume the part is faulty.
How much does a robot mower charging station cost to replace in the US?
Not from the sources we could read. Ask an authorized dealer for a quote using the exact part number, and confirm whether the price includes tax.
Sources
- Husqvarna support: reinstall the charging station (Husqvarna): reasons to reinstall, app steps, boundary note.
- Husqvarna support: charging station placement guide (Husqvarna): clearances, level ground, bent baseplate, metal objects.
- Mammotion charging station installation guide (Mammotion): anchoring, expansion bolts, docking shift warning.
- Worx Landroid Vision installation guide (Worx): outlet distance and cable length.
- Husqvarna charging station assembly 576636712 listing (reseller): EUR 485.00 with EUR 414.53 excluding VAT, read 2026-11-12.
01Up next7 min readLearnHow Much Does a Robot Mower Charging Station Cost?Updated Nov 14, 2026
027 min readLearnHow Much Does an RTK Base Station Cost?Updated Nov 14, 2026
037 min readLearnHow Much Does It Cost to Install a Robot Mower?Updated Nov 14, 2026
049 min readLearnIs the Charging Station Included With a Robot Mower?Updated Nov 12, 2026
057 min readLearnWhat Do Robot Mower Charging Station Lights Mean?Updated Nov 12, 2026
068 min readLearnMammotion Luba Stuck at Charging Station: Causes and FixesUpdated Nov 11, 2026