Boundary Wire Gauge for Robot Mower: What the Specs Say
7 min read · by Jordan Ellis · Updated
Boundary wire gauge for robot mower is the thickness of the perimeter wire, and the makers we read publish it as a diameter in millimeters. Husqvarna lists 2.7 mm for its standard wire and STIHL lists 3.4 mm for its iMOW wire. Thickness affects electrical resistance, so the wire your mower’s manual specifies is the reference to follow.
The short answer
- Diameter: Husqvarna’s standard boundary wire is 2.7 mm, and STIHL’s iMOW perimeter wire is 3.4 mm.
- Gauge numbers: the Husqvarna and STIHL pages give no AWG value, so compare millimeters.
- Resistance: thicker wire has lower resistance, and resistance rises as the loop gets longer.
- Matching: any extension must match the existing wire’s diameter, material and resistance.
What boundary wire gauge for robot mower means
Gauge is the conductor thickness, and for boundary wire gauge for robot mower the diameter figure is the easiest number to compare across brands. AWG (American Wire Gauge) is a common gauge scale for electrical wire, but the Husqvarna and STIHL product pages we read use millimeters instead. The only AWG figure we found for robot mower wire is 18 AWG, listed for a Worx expansion kit.
Because the two scales differ, this article does not convert between millimeters and AWG. The pages we read give no conversion, so compare each figure only with others on the same scale.
Diameters published by manufacturers
The published figures for boundary wire thickness are 2.7 mm for Husqvarna’s standard boundary wire and 3.4 mm for STIHL’s iMOW perimeter wire. The Husqvarna product page lists its 2.7 mm wire in 150 m, 250 m and 800 m loops, made of aluminum and copper.

| Product | Published figure | What the page says |
|---|---|---|
| Husqvarna standard boundary wire | 2.7 mm outer diameter | 150 m, 250 m and 800 m loops; no AWG stated |
| STIHL iMOW perimeter wire | 3.4 mm diameter | 500 m reel; no AWG stated |
| Robomow wire repair connector | Up to 3.9 mm wire diameter | A connector limit, not a wire specification |
| Worx Landroid expansion kit | 18 AWG | 164 ft of wire with 3 connectors |
On its Automower boundary wire page, Husqvarna describes the wire as suitable for most Automower installations and is easy to install. That is a general statement, not a list of limits for every mower, so the manual still decides what your model accepts. If you are working out how much wire to buy, see how much boundary wire you need.
Why thicker wire has lower resistance
Thicker wire has lower electrical resistance, and resistance rises as the loop gets longer. Robomow’s guide on extending perimeter wire states that the thicker the wire, the lower the resistance, and that thicker wire is especially better for larger areas. The same guide says resistance increases with the length of the boundary wire.
That is the practical reason boundary wire gauge for robot mower matters. A wire that works well on a short loop may leave less margin on a long one. This is our reading of the source, not a figure it gives, and Robomow does not publish a resistance value or a diameter threshold.
Matching extensions and connectors
When you extend a boundary wire loop, the extension must match the existing wire in diameter, material and resistance, so the joined loop behaves like one wire. Robomow’s guide says the parts must match in materials, diameter and resistance, and Anker’s UK installation guide gives the same rule for extension wire.
Robomow’s guide describes the extension process in this order:
- Disconnect. Unplug the wire from the charging station to cut off the power supply.
- Cut. Cut the perimeter wire where the extension goes.
- Join. Insert one end of the existing wire and one end of the extension into a connector.
- Squeeze. Press the connector closed with combination pliers, then repeat on the other end.
- Reconnect and check. Reconnect the wire and check the charging station’s LED lights for a proper signal.
- Secure. Only when everything works, secure the extension with turf hooks or bury it again.
Robomow advises connectors that can be squeezed with combination pliers, and warns that exposed screw connections risk rusting. Its repair connector accepts wire up to 3.9 mm, so the connector’s diameter range has to cover the wire you are joining. Our guide to waterproof robot mower wire connectors covers the options.
Length limits matter as much as gauge
Each mower has a maximum total wire length, and the pages we read send you to the manual for the number. Robomow’s guide says that the maximum length of the boundary wire is finite without giving a figure, while Anker’s UK installation guide says the total length must not exceed the manual’s maximum. Count every extension in that total.

Our reading is to check the total loop length against the manual before you buy, not after the wire is buried. The Anker UK guide is one of the sources for this rule.
Burial depth and test period
Anker’s UK installation guide puts burial depth at 3 to 5 cm, with 7 cm as the maximum. Burial depth is separate from wire gauge, but it is part of the same installation decision; see bury or peg boundary wire for the trade-offs.
The same guide suggests pegs or lawn hooks about every 1 m while the wire lies above ground, and a test period of two to three weeks before you bury it. For the full layout, read how to install a robot mower boundary wire.
What to check before you buy wire
Before you buy wire, check the boundary wire gauge for robot mower in your manual and confirm the diameter, maximum total length and connector range in the manual for your model. These four checks cover the points the sources above agree on.
- The diameter in millimeters, as printed in the manual or on the product page.
- The maximum total length, including every extension you plan to add.
- The connector sizes that cover the diameter you buy.
- The material, since extensions must match the existing wire.
Our reading is that the mower maker’s own wire is the simplest choice, because its diameter, material and resistance are already set for that mower.
Frequently asked questions
Does boundary wire gauge for robot mower need to be thicker for a big yard?
Robomow’s guide says thicker wire has lower resistance and is especially better for larger areas. The mower’s manual still sets the length and matching rules, and a thicker wire does not override a stated maximum length.
Can I use 18 AWG wire for my robot mower?
Only if your manual allows it. Worx lists 18 AWG wire for its own expansion kit, but that does not show what other mowers accept. Check the diameter and resistance rules in your manual before buying a different wire.
Do the wire materials need to match?
When you extend a loop, yes. Robomow’s guide says the materials, diameter and resistance of the parts must match. Husqvarna’s standard wire is listed as aluminum and copper, so compare that material with any replacement you consider.
What if I need to join two pieces of wire?
Use a connector that covers your wire’s diameter, squeeze it with combination pliers, and test the signal before you bury the wire. Robomow’s guide describes this sequence and warns that exposed screw connections can rust.
Sources
- Husqvarna standard boundary wire 2.7 mm (Husqvarna): diameter, materials and loop lengths.
- Husqvarna Automower boundary wire (Husqvarna): the statement on wire suitability.
- STIHL perimeter wire 500 m (STIHL): 3.4 mm diameter and reel length.
- Robomow guide to extending perimeter wire (Robomow): resistance, matching, connectors and extension steps.
- Anker UK boundary wire installation guide (Anker): extension matching, maximum length and burial depth.
- Robomow wire repair connectors (Robomow): 3.9 mm connector limit.
- Worx Landroid expansion kit WA0460 (Worx): 18 AWG wire and 164 ft length.
01Up next6 min readGearEufy E15 Charging Station Cover: What the Spec Sheet SaysUpdated Nov 14, 2026
027 min readGearRobot Mower Ramp for Curb or Step: What the Specs SayUpdated Nov 19, 2026
036 min readGearRobot Mower Wire Locator: Finding Surface and Buried Boundary WireUpdated Nov 20, 2026
048 min readGearUniversal Boundary Wire for Worx Landroid: What to MatchUpdated Nov 11, 2026
058 min readGearBest Robot Mower Boundary Wire 500 ft: What to Check Before You BuyUpdated Nov 11, 2026
069 min readGearRobot Mower Boundary Wire Repair Kit: What to Check Before You RepairUpdated Nov 19, 2026