Best Cut Resistant Gloves for Changing Robot Mower Blades: What to Check

7 min read · by Jordan Ellis · Updated November 11, 2026

The best cut resistant gloves for changing robot mower blades are rated gloves that fit well and that you put on only after the mower is switched off. A cut level on the label tells you how the glove did in one lab test, not how it will hold up on a blade edge. As of 2026-11-10, the manufacturer guidance we read covers the steps, and the standards summary covers the rating scale.

What to do before you touch the blades

Blade work starts with the mower switched off, not with the gloves. Husqvarna’s UK support guide for Automower models says to “turn the mower off, put on protective gloves and turn it upside down” before changing blades. Our reading is that the power-off step should come before any glove choice, because the gloves protect you only while the blade is handled with the mower off.

1. Switch the mower off. Do this before anything else, as Husqvarna’s guide directs.
2. Put on protective gloves. Choose a pair that you can still use for the screws.
3. Turn the mower upside down so the cutting disc is exposed.
4. Line up the skid plate hole with the blade screw, unscrew the old blade and clean the disc.
5. Fit the new blade with a new screw, then reset the blade timer in the app.

The guide does not say to remove the battery for blade work. If your model manual calls for it, follow the manual. For a model-agnostic walkthrough, see our guide on how to change robot mower blades, or the Husqvarna-specific steps in changing Husqvarna Automower blades.

What the cut level scale means

ANSI/ISEA 105 rates cut resistance from A1 at 200 gram-force to A9 at 6,000 gram-force, according to CASRAI’s summary of the ISEA key published in November 2024. Each level is a minimum threshold for a lab cut test, so a glove at A5 passed a higher force than one at A3. According to CASRAI, the test measures the weight needed to cut through the material with 20 mm (about 0.8 in) of blade travel.

Cut levels are only comparable within the same scale. ANSI/ISEA 105 is the US system, and CASRAI says EN 388 is the European standard, so treat them as separate systems when a glove carries a different label. The 2024 edition adds marking requirements, so read the marking on the glove itself rather than older packaging or catalog text.

Why one cut number is not enough

A single cut level does not settle the choice of cut resistant gloves for changing robot mower blades on its own. The OSHA rule for hand protection, 29 CFR 1910.138(b), asks that gloves be selected based on an evaluation of their performance characteristics for the task, as CASRAI’s guide explains.

• The cut test is one lab test. It describes one test condition, not every edge you will meet.
• Other hazards in the same job still need review. CASRAI’s summary says these need separate review.
• A higher level is not automatically the right answer. The choice depends on the task, according to the same summary.
• Cut level does not cover puncture, abrasion or chemical exposure, and no glove is cut-proof, per CASRAI.

CASRAI’s own checklist is short. Identify the cutting hazard in the task and compare it with the label’s cut level, check the same task for other hazards, record the assessment, and replace gloves that are cut, worn through or contaminated. Keep your hands clear of the cutting edge even when gloves are on.

Best cut resistant gloves for changing robot mower blades: what to check

The best cut resistant gloves for changing robot mower blades are judged on four points: rated cut level, fit, grip and how well you can handle screws. Our reading is that these four checks matter more than a brand name when you compare cut resistant gloves for robot mower blade work.

• Rated cut level. Look for an ANSI/ISEA 105 level on the label and compare only within that scale.
• Fit. A snug glove keeps fingers from catching on the blade edge and still lets you feel the blade.
• Grip. Our reading is that a grip that holds the blade steady matters when you turn the mower and loosen the screw.
• Screw handling. Our reading is that you need to pick up a small screw, so choose gloves you can still work in.

Gloves help only when they are worn with the power-off routine above. They do not replace switching the mower off. If blades and tools live together, a robot mower maintenance kit keeps gloves, screws and spare blades in one place, and our note on universal robot mower blades explains what to check before buying replacements.

How often blades get changed

Husqvarna’s guide says main cutting disc blades typically last 3 to 6 weeks, while EdgeCut disc blades last 9 to 12 weeks. Those intervals matter when you shop for the best cut resistant gloves for changing robot mower blades, because each blade change is a separate hands-on task. Husqvarna adds that worn blades cause uneven cuts, higher battery use and lower efficiency, so the pair worth owning is one you will actually put on every few weeks.

Replace the blades sooner if grass tips look frayed or whitened, or if a blade is visibly damaged. Husqvarna’s seasonal guide also recommends replacing blades before winter storage, since fresh blades help prevent rust on the disc, and to check the blades again in spring if they were not changed at the end of the season.

Fit, screws and matching blades

Husqvarna’s guidance on fasteners is strict: replace the screw each time you change a blade, because reusing screws can let blades come loose during operation. Our reading is that the best cut resistant gloves for changing robot mower blades combine a cut rating with good grip and finger control, which makes that small-screw job easier.

• Use a new screw with each new blade. Do not reuse the old one.
• Do not mix blade types. Never fit different blade types on the same disc.
• Do not mix old and new blades on the same disc. Husqvarna’s guide says never to do this.

Frequently asked questions

Sources

• Husqvarna Automower support guide by season (manufacturer): power-off and glove step, blade life, screw rule.
• CASRAI cut-resistant gloves levels guide (industry guide): ANSI/ISEA 105 A1 to A9 thresholds and the OSHA 1910.138(b) selection rule.

Keep exploring

More from Gear

Six guides picked for the same topic as this one.

All 80 guides →

01Up next8 min readGearUniversal Robot Mower Blades: What Fits and What to CheckUpdated Nov 11, 2026028 min readGearDull Robot Mower Blades Signs: What to Check and When to ReplaceUpdated Nov 11, 2026037 min readGearHow to Change Robot Mower Blades (Step by Step)Updated Nov 11, 2026047 min readGearHow to Change Husqvarna Automower Blades (Step by Step)Updated Nov 11, 2026058 min readGearHow to Change Mammotion LUBA Blades in 8 StepsUpdated Nov 11, 2026069 min readGearRobot Mower Blade Screws Replacement: When to Change ThemUpdated Nov 11, 2026