Robot Mower Replacement Blades: Which Fit Your Model
8 min read · by Jordan Ellis · Updated
A robot mower replacement blade fits your mower only when its part number matches the one the manufacturer lists for your exact model. Brands publish fitment by model name, and one model name can come with several blade types and pack sizes. So the model name and the art number both matter. This guide shows how to confirm robot mower replacement blades which fit my model, using fitment lists published by Husqvarna and guidance from Worx, Eufy and Sunseeker, as of 2026-11-10.
The short answer
- Match the art number: Husqvarna lists separate art numbers for each blade type and pack, such as 577 86 46-03 for a 9-piece Classic set.
- Check the model list: Husqvarna’s Classic blade page lists more than 30 Automower models, and the Endurance page lists its own set.
- Keep the length and mount right: Sunseeker says a wrong length or mounting pattern is unsafe.
- Replace on a schedule that fits your brand: Husqvarna gives 3 to 6 weeks under favourable conditions, while Eufy advises replacing blades when they are dull, bent or chipped.
Why the model number decides the fit
Blade fit starts with the model, not the cutting width. Sunseeker notes that the same cutting width can use different blade lengths, so two mowers that look alike may take different parts. A blade that is close in size is not the same as a blade that is listed for your model. Mounting pattern matters too, because the blade has to seat on the hub the same way the original did.
For robot mower replacement blades which fit my model, the manufacturer’s own list is the only source that settles the question. Our reading is that a model name alone is the first filter, not the final answer. Treat the part number as the decision point and use the model name to find it.
Where to find your model and part number
Finding robot mower replacement blades which fit my model starts with the exact model name printed on your mower’s label, in the manual, or in the app or account page for the mower. Suffixes matter. Husqvarna lists suffixed variants as separate entries, including the 305E NERA, the 310 Mark II, and the 430X NERA with wire free technology, so a blade listed for the 430X may not be the one listed for the 430X NERA.

- Write down the full name: include letters such as X, V, E, or NERA, plus any Mark II or wire free tag.
- Use the brand’s model page: search the manufacturer’s blade page for that name, not a general search engine result.
- Note the blade type: the page you pick will show Classic or Endurance blades separately.
Robot mower replacement blades which fit my model: the fitment lists
Each row below shows one set of robot mower replacement blades which fit my model, if your model appears on that list. Husqvarna is the brand that publishes the most specific fitment data we could read. Its two blade lines use different art numbers, and each line has its own model list. The table below shows what the official pages state as of 2026-11-10.
| Brand and blade | Pack | Art no. | Fitment statement |
|---|---|---|---|
| Husqvarna Classic, carbon steel | 9 pieces | 577 86 46-03 | Model list includes 310, 450X, 265 ACX, 315X and 430X NERA, among more than 30 models |
| Husqvarna Classic, carbon steel | 45 pieces | 577 60 65-05 | Same Classic model list |
| Husqvarna Endurance | 6 pieces | 595 08 44-01 | Model list includes 310, 405X, 450X NERA and Aspire R4 |
| Husqvarna Endurance | 45 pieces | 595 08 44-02 | Same Endurance model list |
| Worx Landroid long-life blades | Not stated | Not stated | Brand states the blades are compatible with all Landroid models |
The 310 appears on both Husqvarna lists, so a shared model name does not settle the choice. Pick the blade type and pack size you want, then confirm the art number on that same page. The Endurance page lists model names only, with no separate model numbers or serial number check, so the model name is what you match.
Heads up
Neither Husqvarna page explains how to check fit by serial number. If your model name is not on the list, do not assume a near match. Contact the brand before ordering.
Choose the blade type and pack size
Blade count changes what you buy, and the right count is part of finding robot mower replacement blades which fit my model. Husqvarna sells 9-piece and 45-piece Classic packs, and 6-piece and 45-piece Endurance packs, so the same model can have several correct options. Match the pack to how many blades your mower uses and to how you plan to buy, not to a price. Price is not a fit signal, and this guide does not list prices.
Our reading is that the cheapest set is rarely the right one when it does not match your list. A mismatched set may have to be returned, and the mower stays out of use while you wait for the correct part.
Why a wrong blade is a safety problem
Fit is a safety matter, not only a performance one. Sunseeker states that a wrong length or mounting pattern is unsafe, so a blade that almost fits should not be forced onto the hub.
- Power off first: Eufy advises turning the mower off fully and wearing gloves before you touch the blades.
- Do not run it damaged: Eufy says not to run the mower with a blade missing or bent unless the manufacturer says it is safe.
- Use original hardware: Husqvarna recommends original blades and screws.
- One blade per screw: Husqvarna says to use only one blade with each screw, because otherwise the cutting set is unbalanced.
Third-party listings and universal claims
A universal claim does not tell you which robot mower replacement blades fit my model, because only the model list does. Some retail listings describe a blade as fitting all models of a brand, and some third-party listings give part numbers that do not appear on the manufacturer’s own pages. Our reading is that a manufacturer’s model list is the reference, and a broad retail claim is not a substitute. Where a listing and the official page disagree, follow the official page and ask the brand before you buy.
How often to replace the blades
The replacement interval depends on the brand’s guidance and on your lawn, and it matters as much as fit when you buy robot mower replacement blades which fit my model for a long season. Husqvarna gives a blade lifetime of 3 to 6 weeks under favourable conditions. Worx says to replace its long-life blades every 3 to 4 months in its FAQ, which is a different schedule from Husqvarna’s.

Eufy takes a different view. It says there is no reliable calendar rule and advises replacing blades when they are dull, bent, chipped or damaged. On many designs, Eufy also recommends replacing the full set together rather than one blade at a time, so check your manual before you mix old and new blades.

What to check before you buy
Work through this list before you order any replacement blade for your mower.
- Confirm the full model name. Include suffixes such as NERA, Mark II, or wire free.
- Match the art number on the brand’s fitment list for that model.
- Choose the blade type and pack size that the same page lists for your model.
- Check the screws. Husqvarna recommends the original screws with the original blades.
- Read your manual for the replacement set rule, since Eufy advises replacing the full set on many designs.
Frequently asked questions
How do I find robot mower replacement blades which fit my model?
Start with your exact model name, including suffixes such as NERA or Mark II. Then match the art number on the brand’s fitment list for that model, since Husqvarna’s pages list specific models for each art number rather than one universal blade.
What is the difference between Classic and Endurance blades?
Husqvarna sells both lines with separate art numbers and pack sizes, so they are not the same product. The Classic 9-piece set is carbon steel, while the Endurance packs have their own art numbers of 595 08 44-01 and 595 08 44-02. Check the model list on each page before choosing.
What happens if the blade length is wrong?
Sunseeker says a wrong length or mounting pattern is unsafe. Do not run the mower with a mismatched blade, and do not force a near fit onto the hub. Contact the brand if your model is missing from the list.
How do I know when to replace the blades?
Follow your brand’s guidance. Husqvarna cites 3 to 6 weeks under favourable conditions, Worx cites 3 to 4 months, and Eufy says to replace blades that are dull, bent, chipped or damaged. Blade wear depends on your lawn, so inspect the blades regularly.
Sources
- Husqvarna Classic blades (Husqvarna): art numbers, pack sizes and the Classic model list.
- Husqvarna Endurance blades (Husqvarna): Endurance art numbers and model list.
- How to change the cutting blades on your Automower (Husqvarna): 3 to 6 week lifetime, original blades and screws.
- Landroid long-life replacement blades (Worx): compatibility claim and 3 to 4 month FAQ.
- Robot lawn mower blades replacement (Eufy): replacement signs, full-set advice and safety steps.
- Types of lawn mower blades (Sunseeker): blade length and mounting pattern safety.
01Up next8 min readGearDreame Replacement Blades: How to Match Your ModelUpdated Nov 20, 2026
027 min readGearSunseeker Replacement Blades: What Fits, What to Check and When to SwapUpdated Nov 12, 2026
037 min readGearHusqvarna Automower Replacement Blades: Part Numbers and Fit ChecksUpdated Nov 20, 2026
046 min readGearEcovacs GOAT Replacement Blades: Kit, Fit, and TimingUpdated Nov 20, 2026
057 min readGearWorx Landroid Replacement Blades: Pack, Timing, and FitUpdated Nov 20, 2026
066 min readGearLymow Blades: Which Replacement Fits Your MowerUpdated Nov 20, 2026