Segway Navimow Replacement Blades: How to Choose and When to Change
7 min read · by Jordan Ellis · Updated
Segway Navimow replacement blades should be changed every one to two months with regular use, and each fit should be checked against your exact model first. Segway’s support pages say to replace the blades and screws together, using three screws, a cross-tip screwdriver, and heavy gloves. Retailer listings do not agree on which Navimow models a blade set fits, so confirm the match before you order. Segway’s own support articles are the most reliable place to check.
The short answer
- Interval: every 1 to 2 months on the H1 with regular use, or every 80 working hours on the Terranox, according to Segway support.
- Fit: match the blade set to your model label, not just the series name.
- Pack size: Segway says each i1 mower package includes 12 blades.
- Rust: contact Segway Navimow Support with the serial number and a photo.
What a Navimow replacement blade set includes
Segway Navimow replacement blades come as a set: the blades plus the screws that fasten them to the mower’s cutting discs. Segway’s support articles treat the two as one job: the H1 guide says to replace the blades and screws every one to two months, and the Terranox guide says to replace them together after every 80 working hours.
When you check a Segway Navimow replacement blade listing, look at two things. The first is the blade count. Segway’s i1 rust article says each mower package includes 12 blades, and that once those are used up, replacements can be bought from a local dealer or the Segway Navimow website. The second is the screws. Because the H1 and i2 LiDAR steps both fasten the new blades with new screws, buy the screws with the blades rather than reusing old hardware. Segway’s H1 article does not state a blade count per replacement, so count the blades on your mower before you order.
How to choose Segway Navimow replacement blades for your model
The safe way to choose is to match the blade set to your exact model, not to the series name alone. Third-party sellers list the same blade set for different series, and the model suffixes in their listings are not consistent. Sunseeker’s brand blog warns that a wrong blade length or mounting pattern is unsafe, and that the same cutting width can use blades of different lengths. The same logic applies to Segway Navimow replacement blades and to blades from any other brand.

Our reading is that a universal-fit claim should stay unconfirmed until a Segway support page or a Segway compatibility list names your model. Before you order, work through these checks:
- Read the model label on the mower body, including the letters and numbers after the series name.
- Open the support article for that series and compare its steps and interval with your mower.
- Check the length and mounting of each blade against the old blade you removed, or against the support article’s description.
- Buy the full set that the support article describes, including screws.
How often to replace Navimow blades
For regular use, Segway’s H1 article says to replace the blades and screws every one to two months, while the Terranox article uses running time instead, every 80 working hours. Segway gives no single interval that covers every model, so the page for your mower is the one to follow when you budget for Segway Navimow replacement blades. For brand-wide intervals, see how long robot mower blades last.

| Model (Segway support) | Replacement guidance | Basis |
|---|---|---|
| Navimow H1 | Every 1 to 2 months with regular use | Calendar time |
| Navimow Terranox | Every 80 working hours | Running time |
| Navimow i1 | Regular replacement recommended; rust can appear after more than 80 hours of use | Usage and condition |
The two measures do not convert neatly. A mower that runs a few hours each day will reach 80 working hours faster than the one-to-two-month calendar suggests, so track both when you can. Our reading is to replace on whichever limit comes first.
Fitting Segway Navimow replacement blades
Fitting follows the same order on the H1 and i2 LiDAR: power off, set the mower upside down on a soft surface, remove three screws with a cross-tip screwdriver, fit the new blades with new screws, and confirm they pivot freely. Segway says to wear heavy-duty gloves, and on the i2 LiDAR you hold the OK button for three seconds to power off. The Terranox adds a disc and cover sequence, so follow the article for your model.
The full H1 steps are on Segway’s H1 blade replacement guide, and our how to change Segway Navimow blades guide covers the job step by step. A pair of cut resistant gloves for changing blades is worth having before you start.

Common mistakes when buying and fitting blades
The most common mistake with Segway Navimow replacement blades is buying on the series name and skipping the model check. A second mistake is reusing old screws with new blades, since Segway’s steps call for new screws to be fastened with the new blades (see robot mower blade screws replacement). A third is skipping the pivot check: if a blade does not move freely after fitting, the set is not seated correctly and should be checked before you mow again.
Replace the blades and screws as one set, as Segway’s H1 and Terranox guides describe, rather than swapping a single blade and leaving the rest of the hardware from the last service.
When a blade is rusty or worn early
Rust on Navimow i1 blades can appear after more than 80 hours of use, according to Segway’s support article on rusty blades. Segway asks you to contact support with the mower’s serial number and a photo of the blade, and recommends regular replacement. The US support email listed there is navimowsupport-us@rlm.segway.com. For how to tell a dull blade from a rusty one, see dull robot mower blade signs.
Frequently asked questions
Do Navimow blades need to be replaced with the screws?
Yes, according to Segway’s H1 support article, which says to replace the blades and screws every one to two months with regular use. Replacing both together keeps the new blades fastened with fresh hardware.
Does one Navimow blade set fit every model?
No such fit is confirmed in the sources we read. Retailer listings disagree, and Segway’s support articles are written per series. Check the model label on your mower against the support article for that series before you buy.
How many blades come in a Navimow package?
Segway’s i1 rust article says each mower package includes 12 blades. The H1 article does not give a count per replacement, so count the blades on your own mower before ordering.
What should I do if a Navimow blade is rusty?
Contact Segway Navimow Support with the mower’s serial number and a photo of the rusty blade. Segway’s i1 support article gives this as the first step, and says rust can appear after more than 80 hours of use.
Sources
- Navimow H1: How to replace the blades (Segway support): replacement interval, three screws, tools, gloves, pivot check.
- Navimow Terranox: How to replace the blades (Segway support): 80 working hour interval, disc and cover order.
- Navimow i2 LiDAR: How to replace the blades (Segway support): OK button hold, cross-tip screwdriver, upside-down placement.
- Navimow i1: What should I do if the blade is rusty (Segway support): 12 blades per package, rust after 80 hours, support steps.
- Types of lawn mower blades (Sunseeker brand blog): blade length and mounting pattern as a safety point.
01Up next7 min readGearHow to Change Segway Navimow Blades: Step-by-Step GuideUpdated Nov 19, 2026
028 min readGearBest Garage for Segway Navimow: How to Choose OneUpdated Nov 14, 2026
037 min readGearSegway Navimow Spare Parts: What Wears Out and When to ReplaceUpdated Nov 20, 2026
049 min readGearRobot Mower Blade Screws Replacement: When to Change ThemUpdated Nov 19, 2026
056 min readGearSegway Navimow Replacement Battery: Check Your Model FirstUpdated Nov 12, 2026
068 min readGearSegway Navimow Accessories Worth BuyingUpdated Nov 20, 2026