How to Change Segway Navimow Blades: Step-by-Step Guide
7 min read · by Jordan Ellis · Updated
How to change Segway Navimow blades: switch the mower off, place it upside down on a soft clean surface, loosen the three screws with a cross-tip screwdriver, remove the old blades, then fit new blades and screws and check that each blade pivots freely. Segway’s support articles for the Navimow H1 and i2 LiDAR describe this sequence, and the Terranox guide follows the same idea with a different disc layout.
The short answer
- Power off: turn the mower off. On the i2 LiDAR, hold the OK button for 3 seconds.
- Flip it: place the mower upside down on a soft, clean surface to avoid scratches.
- Swap the blades: loosen the screws with a cross-tip screwdriver, remove the blades, and fasten the new blades and screws.
- Check the fit: each blade must pivot freely before you put the mower back to work.
- Replace on schedule: Segway lists every 1 to 2 months for the H1 and every 80 working hours for the Terranox.
What you need before you start
Before you learn how to change Segway Navimow blades, check the tools. Segway’s Navimow support articles name only one tool for this job: a cross-tip (Philips head) screwdriver. Segway does not give a size, so use a driver that fits the screws snugly. Wear heavy-duty gloves for the whole job, because the blade edges are sharp. Segway’s H1, i2 LiDAR and Terranox guides all include this warning.
Before you open the mower, confirm you have replacement blades and screws for your exact model. Segway’s i1 rust guide says each mower package includes 12 blades, and that replacements can be bought from a local dealer or the Segway Navimow website once those are used up. Because the parts list varies by model, read the support article for your mower before buying.
Turn the mower off and set it up safely
Power off the mower before you touch any blade. Segway’s i2 LiDAR guide says to press the OK button for 3 seconds to turn it off. The H1 and Terranox guides simply say to turn the mower off first, so use the power-off method in your manual if your keypad works differently.
Next, place the mower upside down on a soft, clean surface. Segway’s guides for these models give this instruction to avoid scratching the cover. A clean surface also keeps grit away from the blade area while you work. If the mower sits on gravel or a hard patio, lay down a folded towel or a foam mat first.
How to change Segway Navimow blades, step by step
On the Navimow H1 and i2 LiDAR, the blades are held by three screws. Segway’s steps for these models are short, and the order below follows them. The Terranox uses a different layout, so the notes after the list explain that variant.
- Turn off the mower. Use the power-off method for your model, then turn the mower upside down on the soft surface.
- Loosen the three screws. Use a cross-tip screwdriver to loosen the three screws that hold the blades.
- Remove the screws and blades. Take out the screws and the old blades together, and keep the screws with the blades you are replacing.
- Fit the new blades and screws. Fasten the new blades and screws in place.
- Check that each blade pivots freely. Turn each blade by hand. It should move smoothly on its screw.
The Terranox article follows a different sequence. You remove the blade discs first, then take off the upper cover of the blade discs. Next you replace the blades, reinstall the upper cover, and mount the blade discs back in place. The same cross-tip screwdriver and heavy gloves apply. Segway’s Terranox guide does not state a check after installation beyond the normal confirmation that the discs are secure, so our reading is to turn each disc by hand before you power the mower on.
Segway’s i2 LiDAR blade replacement article sets out the same order with the power-off step and the pivot check.


How often to replace Navimow blades
Segway gives different intervals by model, so check the one that matches your mower. The safest habit is to replace the blades and screws on the schedule your model’s guide lists, rather than waiting until the grass looks ragged.
| Model in Segway guide | Replacement interval | What to check |
|---|---|---|
| Navimow H1 | Every 1 to 2 months with regular use | Three screws, blades pivot freely |
| Navimow Terranox | Every 80 working hours with regular use | Blade discs and upper cover |
| Navimow i1 (rust guidance) | Rust can occur after more than 80 hours of use; regular replacement recommended | Any rust on the blade |
Knowing how to change Segway Navimow blades is only half the job, because timing decides how sharp they stay. The H1 interval is in calendar months, while the Terranox interval is in working hours. That difference matters. A mower that runs every day will reach 80 working hours much sooner than the calendar suggests, so a hours log or the app’s usage data gives a better schedule than a date on the calendar. Segway’s i1 rust guidance uses the same 80-hour mark, which supports our reading that 80 working hours is a practical check point across the range.
Brand intervals differ widely, so use the Segway number for a Navimow rather than a figure from another brand.

When a blade is rusty or worn early
Rust is the main reason to replace blades earlier than the scheduled interval, and the same steps apply: if you need to learn how to change Segway Navimow blades in a hurry, start with the power-off step. Segway’s i1 rust guide says rust can occur once a blade has been used for more than 80 hours, and it recommends regular replacement. A rusty blade is not something to clean and keep running.
- Contact Segway support. Provide the mower’s serial number and a photo of the rusty blade.
- Follow the replacement steps. Segway’s guide links to its blade replacement article for the procedure.
- Order a full set. Replace all the blades together, since they wear at a similar rate.
Wear is not always rust. A blade that looks dull, frayed or chipped can also cut poorly and load the motor. Our reading is that any visible damage is a reason to change the set early, and that a blade that will not pivot freely should be checked before the mower runs again.
Frequently asked questions
How do I change Segway Navimow blades without special tools?
Segway’s support articles name a cross-tip (Philips head) screwdriver and heavy-duty gloves. No other tool is listed for the H1, i2 LiDAR or Terranox guides.
How often should I change Segway Navimow blades?
For the Navimow H1, Segway advises every 1 to 2 months with regular use. For the Terranox, the guide says every 80 working hours. Check the support article for your model.
Do I replace all the blades at once?
Segway’s i1 rust guidance recommends regular replacement, and the packages include 12 blades. Our reading is to replace the full set together so the blades wear evenly and stay balanced.
What should a blade do after I fit it?
Segway’s H1 and i2 LiDAR guides say to make sure the blades can pivot freely after you fasten the new blades and screws. A blade that does not move at all needs a closer look before the mower runs.
Sources
- Navimow i2 LiDAR: How to replace the blades (Segway Navimow support): power-off step, three screws, cross-tip screwdriver, pivot check.
- Navimow H1: How to replace the blades (Segway Navimow support): interval of 1 to 2 months, three screws, upside-down placement.
- Navimow Terranox: How to replace the blades (Segway Navimow support): 80 working hours, blade disc and upper cover sequence.
- Navimow i1: What should I do if the blade is rusty (Segway Navimow support): rust after more than 80 hours, 12 blades per package, support contact steps.
01Up next7 min readGearSegway Navimow Replacement Blades: How to Choose and When to ChangeUpdated Nov 20, 2026
028 min readGearHow to Change Eufy E15 Blades: Steps, Parts and SafetyUpdated Nov 10, 2026
039 min readGearHow to Change Dreame Blades: Steps, Timing and ToolsUpdated Nov 19, 2026
049 min readGearHow to Change Anthbot Blades: Step-by-Step GuideUpdated Nov 10, 2026
057 min readGearHow to Change Sunseeker Blades: Steps, Safety and Replacement TimingUpdated Nov 19, 2026
067 min readGearHow to Change Worx Landroid Blades in 7 Simple StepsUpdated Nov 19, 2026