How to Change Eufy E15 Blades: Steps, Parts and Safety
8 min read · by Jordan Ellis · Updated
To learn how to change eufy E15 blades, power the mower off completely, replace all three blades and their screws at the same time, and never reuse the old screws. Eufy’s support page for the E15 says to swap the full set after every 240 hours of operation, adjusted for how much you mow. The E15 also shares its blade parts with the E18 and E15Gen2, according to the same page, so check the model name on your mower before you buy a kit.
The short answer
- Interval: eufy support advises replacing all three blades after about 240 hours of operation.
- Replace as a set: swap all three blades and screws together, not one blade at a time.
- Screws: do not reuse them. Worn screws can loosen a blade during operation.
- Safety: wear protective gloves, and keep the mower fully off while you work.
How often to change eufy E15 blades
Knowing when to act is part of learning how to change eufy E15 blades on time. Eufy gives a usage-based interval for the E15 rather than a calendar date. Its support article says to “replace all three blades after every 240 hours of operation,” depending on how often the mower runs. A mower that runs most days on a large lawn will reach that count sooner than one that mows once or twice a week, so the hour count is a ceiling rather than a target.
Eufy’s brand guide adds that blades should be checked on condition as well as on hours. It recommends an inspection every few weeks during the growing season, and more often where the lawn has sand, twigs, or debris. Our reading is that a blade that is already dull, bent, chipped, or cracked should be replaced before the 240-hour mark, not after it.
Eufy’s wider maintenance guide, which names the E15 among its models, is less precise. It says to inspect blades “at least once a month during the mowing season,” and it describes replacement as “every 4 to 8 weeks” for many owners, depending on the model and the lawn. That figure is generic and is not attached to the E15, so it conflicts with the 240-hour figure on the E15 support page. We would treat the support page as the model-specific guide and use the monthly inspection as the routine check.
For comparison, Husqvarna gives a shorter interval for its own disc blades: main disc blades last 3 to 6 weeks under normal conditions, and EdgeCut discs last 9 to 12 weeks. Robomow advises replacing disc blades every 2 to 3 months. These are other brands’ figures, so they are useful only as a sense of scale.
Parts and tools you need
The E15 uses a replacement blade disc kit, sold for the E15 and E18. A retailer listing for part T290T011 describes it as one blade disc with three screws, and eufy also sells a larger set of three blade sets with nine blades and nine screws. Confirm the count against the product page before you order, because listings describe these kits differently.
The same maintenance guide lists the E15 cutting width as 203 mm and its cutting height as 25 to 75 mm, and rates the E15 as IPX6 for water resistance. Those figures do not change the blade procedure, but they help you judge whether a blade set fits the mower you own. Check the mower label before you buy.
Before you start, gather what the job needs. You will need gloves and a screwdriver that fits the screw head. The retailer listing for the kit advises wearing gloves when changing the blades. A customer review on that listing describes snapping a screw by using a power screwdriver, so hand-tightening is the safer choice. Eufy’s support page says to tighten fixings only as the manufacturer specifies, and the torque value for the E15 was not in any source we could read.

How to change eufy E15 blades, step by step
Here is how to change eufy E15 blades in general terms. Eufy’s published step-by-step procedure for the E15 was not available in the sources we could read, and the E15 user manual was not retrieved. The order below follows general robot mower practice and the parts rules that Eufy does publish. If your manual gives a different order or a torque value, follow the manual.
- Turn the mower off fully. The same maintenance guide advises switching the mower off fully and disconnecting any safety key or removable battery before work. Confirm the blade system cannot start before you touch anything. Eufy’s inspection steps begin with the same check.
- Put on gloves and set the mower on a stable surface. Brush away clippings and soil so each blade and screw is visible.
- Remove the old screws. Keep the old blades aside, and do not put the old screws back in.
- Fit the new blade disc or blades. Check that each blade is seated correctly and that the blade disc is not cracked.
- Fit the new screws and tighten by hand. Snug each screw without forcing it. Eufy warns that worn screws can loosen blades and cause serious injury.
- Check the blades move freely. A blade that binds or sits off-level should be refitted before the mower runs.
- Test in a clear area. Run the mower where people and pets are kept away, and stop it at once if you hear rattling or see a blade wobble.
Signs your blades need changing
Eufy’s brand guide lists the signs that a blade has reached the end of its life. Replace blades when they are dull, bent, chipped, or damaged. The guide describes ragged or brown grass tips after mowing as a sign the cutting edge is dull, and says a bent or cracked blade should be replaced before the next mow.
| What you see | What to do |
|---|---|
| Ragged or brown grass tips after mowing | Inspect the blades and replace if the edge is dull |
| Blade bent, chipped, or cracked | Replace before the next mow |
| Mower hit a stick, stone, or metal object | Stop, power down, and inspect every blade and screw |
| Cut quality drops in one area only | Clean the deck and check all blades; a single patch alone is not a reason to replace them |
Eufy’s guide also advises against sharpening unless the manual expressly allows it. Sharpening can change a blade’s shape or leave a damaged blade in use, so the usual advice is to replace the full set.

Mistakes to avoid when changing E15 blades
Most avoidable problems come from three habits. The first is reusing screws, which Eufy says not to do. The second is replacing one blade and keeping the others, when Eufy says to replace all three blades and screws at the same time for good cutting performance. The third is over-tightening with a power tool, which a customer report on a retailer listing links to a snapped screw.
A fourth mistake is skipping the safety steps when you change eufy E15 blades. Eufy’s inspection guidance says to turn the mower fully off, keep children and pets away, and not run the mower with a blade missing, bent, or damaged unless the manufacturer says that is safe. If the blade disc, a fixing, or the motor area is damaged, stop using the mower and contact eufy support rather than straightening or repairing the part yourself.
Once the new set is on, keep a note of the date and hours so you know when the next change is due. Finally, dispose of old blades carefully. Eufy’s guidance says to check local council rules and to store used blades in a rigid container, as local guidance allows.
Frequently asked questions
How often should I change eufy E15 blades?
Eufy support advises replacing all three blades after every 240 hours of operation, depending on how often the mower runs. Inspect them every few weeks in the growing season and replace sooner if they are dull or damaged.
Do I need to replace the screws too?
Yes. Eufy says to replace all three blades and screws at the same time and not to reuse screws, because worn screws can loosen a blade during operation.
Can I sharpen the E15 blades instead of replacing them?
Eufy’s guide advises replacing rather than sharpening, unless the model’s instructions expressly allow sharpening. Sharpening can change a blade’s shape, so check your manual first.
Which blade kit fits the E15?
Eufy’s replacement kits are listed for the E15 and E18. A retailer listing for part T290T011 describes one blade disc with three screws, while eufy also sells a set of three blade sets with nine blades and nine screws. Check the product page for your model before buying.
Sources
- Eufy support: replacement parts and how often to replace them (E15, E18, E15Gen2) (Eufy): the 240-hour interval, replace-as-a-set rule, screw rule, and gloves advice.
- Eufy blog: robot lawn mower blade replacement (Eufy): inspection interval, signs of wear, replace-not-sharpen guidance, and inspection safety steps.
- Husqvarna support: how and when to change blades on your Automower (Husqvarna): comparison intervals for other disc blades, and the one-blade-per-screw rule.
01Up next7 min readGearHow to Change Sunseeker Blades: Steps, Safety and Replacement TimingUpdated Nov 19, 2026
027 min readGeareufy E15 Spare Parts: Blades Are the Only Replaceable PartUpdated Nov 11, 2026
038 min readGeareufy E15 Replacement Blades: What to Check Before You OrderUpdated Nov 20, 2026
047 min readGearHow to Change Segway Navimow Blades: Step-by-Step GuideUpdated Nov 19, 2026
059 min readGearHow to Change Dreame Blades: Steps, Timing and ToolsUpdated Nov 19, 2026
069 min readGearHow to Change Anthbot Blades: Step-by-Step GuideUpdated Nov 10, 2026