Robot Mower vs String Trimmer Edging Time
6 min read · by Tyler Novak · Updated
In a robot mower vs string trimmer edging time comparison, a robot cuts the open lawn but usually leaves a border that a trimmer or edger still has to finish. A vendor guide puts manual edging at about 15 to 20 minutes a week, but that figure is the company’s estimate and not a measured result. This guide explains what a robot leaves behind, how long manual edging takes, and where newer robots are closing the gap.
The short answer
- Robot mowers: most use a central cutting deck, so they leave a strip of uncut grass along borders, beds, and walls.
- Manual edging time: a vendor estimate of about 15 to 20 minutes a week for a string trimmer, depending on how long the edges are.
- Trimmer or edger: a trimmer handles routine edging, and a half-moon edger gives a cleaner, deeper line once or twice a season.
- Newer robots: some models add edge-cutting features that reduce the follow-up work, but the performance claims come from the makers.
What a robot mower leaves behind at the edge
A robot mower cuts the grass it can reach, and the cutting disc sits in the middle of the deck. That means the grass along a fence, a flower bed, a path, or a wall is often left a little longer. ECOVACS, a robot mower maker, says centrally mounted blades can leave strips of uncut grass along borders, and its edge-cutting guide gives the best figure it offers for one model: 1.97 inches from unpassable edges. Edging time is a hidden labor cost, and cost comparison with a gas mower shows the rest of the picture.

Robot mower vs string trimmer edging time: how much to expect
The clearest time estimate in the sources comes from Anthbot, another robot mower maker. Its guide to cutting lawn edges says walking the edges with a string trimmer takes about 15 to 20 minutes per week. It also says a light pass every five to seven days keeps edges tidy, and that heavily overgrown edges should be cut back over several days rather than in one session. Larger machines also leave borders for another tool, as robot mower and zero turn finishing work explains.
Those are vendor figures, and they assume a lawn with moderate border length. A long perimeter, lots of beds, or a yard with many fences will take longer. We could not find an independent timing test, so treat the estimate as a starting point and time your own edges for one or two sessions before you plan a schedule.
String trimmer or edger: which finishes the border
A string trimmer is the tool most owners already have, and it works well for routine edging. Anthbot’s advice is to use only the last two to three centimetres of the line, keep the guard away from walls and fences, and keep the head about five to ten centimetres from tree trunks. For driveways, turning the head ninety degrees lets the line cut vertically along the edge. Time spent mowing and edging adds up, so see daily effort with a battery push mower for comparison.
A half-moon edger cuts a shallow trench, about five to ten centimetres deep, and Anthbot recommends it only once or twice a season, guided by a hose or plank. Shears suit delicate plants and tight corners, but they are slow, so they work best for final detailing. Our reading is that an edger makes a cleaner, deeper line than a trimmer, while a trimmer is faster for keeping an existing edge tidy.

Edge-cutting robots and what they change
Some newer robot mowers are designed to reach closer to borders. Anthbot says its LiDAR-equipped models map the garden and tell grass from hard surfaces, and it claims the cutting disc can run exactly along the boundary line. The page does not give a border width, and the claim comes from the maker. A real example of edge limits is Neomow X SE uncut strip reports along walls and fences.
ECOVACS describes edge-cutting technology on several GOAT models and says it reduces the need for follow-up work. The same page gives no edge-specific time estimate, and it says the figures it does publish come from its own lab tests, with results that vary by grass type, lawn size, and terrain. Wire-based boundary placement also affects how close a robot gets, and that depends on the install.

Who each approach suits
A robot mower with a trimmer or edge-cutting feature suits a lawn with many borders and an owner who wants the edges handled automatically. A robot with a standard deck and a separate string trimmer suits a yard with fewer borders, where a short weekly trim is easy to fit in. Another way to cover the borders is hiring a neighborhood teen for yard work, which brings its own trade-offs.
A dedicated edger suits an owner who wants a crisp line along paths and beds once or twice a season. It also suits a lawn with a clear, hard edge that a trimmer cannot cut cleanly. Before you buy, measure the total length of your borders and compare that against the cut distance and edge-cutting claims on the spec sheet.
Related reads: Edge-cutting designs have their own limits, as YUKA passage width and edge limits shows for one popular model.
Frequently asked questions
Do robot mowers cut the edges of a lawn?
Most robot mowers leave a border uncut because the cutting disc sits in the middle of the deck. Some newer models claim closer edge cutting, but the distance varies by model and boundary setup. Check the cut-to-edge figure on the spec sheet.
How much time does a string trimmer need for a robot-mowed lawn?
Anthbot estimates about 15 to 20 minutes a week for walking the edges with a string trimmer. That is a vendor figure, and the real time depends on how many borders your lawn has and how often the robot runs.
Is a string trimmer or a lawn edger better for robot mower edges?
A string trimmer is faster for routine upkeep, while a half-moon edger cuts a deeper, cleaner line. Anthbot recommends using an edger only once or twice a season. Many owners use both: the trimmer weekly and the edger a few times a year.
Will an edge-cutting robot mower replace the trimmer?
It may reduce the trimming needed, but the sources do not show it removes the need completely. ECOVACS describes its edge-cutting models as reducing follow-up work rather than eliminating it. Test the edges on your own lawn before deciding.
Sources
- How to Cut Perfect Lawn Edges Against Any Obstacle (Anthbot, a robot mower maker): trimmer and edger technique, the 15 to 20 minute weekly estimate, and the LiDAR edge-cutting claim.
- Can Robot Lawn Mowers Cut Grass Along the Edges? (ECOVACS, a robot mower maker): uncut strips from central blades, edge-cutting models, and the 1.97 inch figure. The lab results are from the maker.
01Up next8 min readReviews & CompareEcovacs GOAT O1000 LiDAR PRO Review: LiDAR + Edge TrimmerUpdated Nov 16, 2026
028 min readReviews & CompareRobot Mower vs Battery Push Mower: Cost, Time and Lawn SizeUpdated Nov 17, 2026
037 min readReviews & CompareBoundary Wire vs RTK Installation Time: What the Guides SayUpdated Nov 11, 2026
047 min readReviews & CompareRobot Mower vs Landscaping Company Contract: Which Costs Less?Updated Nov 13, 2026
057 min readReviews & CompareRobot Mower Open Box vs New: Warranty, Battery and ReturnsUpdated Nov 13, 2026
067 min readReviews & CompareSmall vs Large Robot Mower for the Same LawnUpdated Nov 18, 2026