Do Robot Mowers Work on a Lawn with Clover?
7 min read · by Rachel Whitman · Updated
Do robot mowers work on a lawn with clover? Yes, a robot mower cuts clover along with the grass, because clover is a low-growing plant that grows under the cutting height. The harder question is whether the mower helps with the clover itself. Clover usually appears where the grass is thin, underfed, or cut too short, and a mower alone rarely fixes those conditions. This guide covers how clover grows, what mowing does to it, and what to set before you run a robot mower on a clover lawn.
The short answer
- It cuts clover: clover sits low and is cut like the grass around it.
- It does not fix the cause: clover thrives where grass is weak, so the lawn condition matters more than the mower.
- Do not cut too short: the Sunseeker guide says cutting grass too short gives low-growing plants an advantage.
- Thin patches: a dense patch of clover may need overseeding or aeration before the robot mower can cover it well.
- Clover is optional: some owners keep it for pollinators and its green color in dry spells.
Why clover grows in a lawn
Clover tends to appear when conditions favour it over grass. Sunseeker’s guide lists the usual causes. Grass often needs more nitrogen than clover, so when nitrogen is scarce, clover can compete better, and clover can draw nitrogen from the air with help from root bacteria. Compacted soil limits grass roots and water, and clover can fill those weak spots. Thin turf leaves bare patches where clover seeds can settle, and dry or uneven watering stresses the grass.
That is why clover is often a signal rather than the problem itself. A lawn with thick, healthy grass gives clover little room, so a robot mower on a dense lawn will meet far less of it.
Does mowing height affect clover?
Yes, mowing height matters more than the type of mower. The Sunseeker guide says cutting grass too short weakens the lawn and gives low-growing plants an advantage, and it advises keeping the correct mowing height for your grass type. Anker’s clover article makes the same point in German: cutting the lawn too short weakens the turf and lets more light reach the soil.
A robot mower can run often and at a low setting, which is the combination the guides warn about. Our reading is that a robot mower should be set to a height that suits the grass, not to the lowest number on the dial. Clover is cut at any height the mower can cut, so the setting decides whether the grass stays strong enough to compete.

Do robot mowers work on a lawn with clover in practice?
A robot mower cuts clover in the same way it cuts grass. Clover leaves are low and broad, and the cutting deck takes them off like any other growth. You do not need a special blade or mode for clover, and the mower will not spread clover by cutting it, since clover spreads by seed and by runners that the mower does not dig up. Frequent light cuts change the sward over time, which lawn health effects of robot mowing discusses.
What the mower cannot do is fix the thin, under-fed grass that lets clover in. If a patch is solid clover with little grass, the mower will cut it short, but the patch will stay clover until the lawn is improved. We did not find a manufacturer test that measures how well a robot mower handles a dense clover patch, so treat that as an open question and check owner reviews from clover-heavy lawns.
Heads up
Robot mowers cut frequently, so a clover patch that spreads into bare soil can grow back quickly. Fill thin areas with grass seed before expecting the mower to keep the patch under control.
Settings to check on a clover lawn
Set the mowing height for your grass rather than for clover. Keep the blades sharp, because a dull blade tears clover and grass and can leave ragged edges. Let the mower run on a schedule that removes only a small amount at each cut, as the Anker article advises when it says not to remove too much at once. Clover patches can raise the risk of uneven cuts, so avoiding scalped lawn spots is useful background.
If you have a large clover patch, consider mowing that area separately or pausing the mower there until the grass is thicker. Many owners find that a boundary island around a dense patch is a simpler fix than trying to reshape the whole schedule.

Should you remove the clover?
Removal is optional. Sunseeker’s guide notes that clover can stay green in dry spells, support pollinators, and reduce some nitrogen fertiliser needs, so keeping some clover is a reasonable choice. If you want a uniform lawn, the guide recommends hand-pulling small patches after rain, testing the soil, aerating compacted areas, overseeding thin spots, and using a selective broadleaf product labelled for clover and your grass if the infestation is large. Clover is only one of several weeds people worry about, and weed spread from robot mowing addresses the rest. A different common lawn weed is dealt with in crabgrass management on robot-mown lawns. If you decide to thicken the turf instead, overseeding a robot-mowed lawn explains how to time it.
A robot mower does not replace those steps. It keeps the lawn cut, which helps the grass compete, and it leaves the decision about clover to you.
Before you buy a robot mower for a clover lawn
If your lawn has clover, the mower’s features matter less than the setup. Check the height range, because you want a setting that keeps the grass healthy. Check whether the mower can run a lighter schedule, because frequent short cuts suit a thick lawn better than long cuts on a thin one. And read the warranty on blades, since blades wear faster on a lawn that is cut often. Another special turf case is covered in bentgrass compatibility with robot mowers.
Frequently asked questions
Will a robot mower cut through clover?
Yes. Clover grows low, so the mower cuts it along with the grass. The mower does not fix the conditions that let clover in, such as thin grass or low nitrogen.
Does a robot mower spread clover?
We did not find a source that says a robot mower spreads clover. Clover spreads by seed and runners, and a mower cutting the top growth does not plant new clover. The main risk is cutting too short, which weakens grass and helps clover.
What mowing height is best for a lawn with clover?
There is no single height. Sunseeker advises the correct height for your grass type rather than cutting short. Set the mower for the grass, and avoid the lowest setting if the turf is thin.
Should I kill the clover before using a robot mower?
Not necessarily. Clover is optional in most lawns and has some benefits. If you want to remove it, test the soil and strengthen the grass first, and use a selective product only for large infestations.
Sources
- Sunseeker: how to control clover in a lawn (manufacturer): the causes of clover, the warning about cutting too short, and the options for keeping or removing clover.
- Anker: how to remove clover from a lawn (German edition) (manufacturer): the advice on cutting too short and regular mowing with sharp blades.
01Up next6 min readLearnMammotion App Not Connecting: Luba Fixes That WorkUpdated Nov 13, 2026
026 min readLearnWorx Landroid App Not Connecting: Fixes That WorkUpdated Nov 13, 2026
036 min readLearnNavimow App Not Connecting: Fixes That WorkUpdated Nov 13, 2026
047 min readLearnLymow won t connect to wifi: fixes that workUpdated Nov 13, 2026
057 min readLearnWhat Is Spot Mowing on a Robot Mower and How Does It Work?Updated Nov 13, 2026
067 min readLearnWhat Is Edge Mode on a Robot Mower and How Does It Work?Updated Nov 13, 2026