Husqvarna Automower App Problems and Fixes
7 min read · by Rachel Whitman · Updated
The Husqvarna Automower app most often fails for four reasons: the phone has no working connection to the mower, the mower is on a Wi-Fi network it cannot reach, the app or mower firmware is out of date, or the login and PIN do not match. Most of these can be checked in a few minutes before you call support.
The short answer
- Connection type first: Bluetooth works for setup and nearby control; remote control from anywhere needs Wi-Fi or a mobile connection, and only some models include one.
- Wi-Fi band: Husqvarna’s support article says the mower’s Wi-Fi is 2.4 GHz only, and 5 GHz networks are not supported.
- Updates: Husqvarna asks you to use the latest version of the Automower Connect app and the latest mower firmware.
- PIN and login: setup needs the mower’s PIN, and the app login must be active before you start.
Husqvarna automower app will not connect to the mower
When the app shows the mower as offline, start by separating a phone problem from a mower problem. Check that Bluetooth is on for the phone, because Bluetooth is the link used for setup and nearby control. Husqvarna’s Automower Connect page describes Bluetooth as the everyday link for a mower within range, while remote control from indoors or from work needs Wi-Fi or a mobile network. If you want the wider context first, start with our robot mower app connection troubleshooting basics before returning to this page.
If the mower is on a Wi-Fi-only model, the app depends on your home network reaching the mower’s work area. Husqvarna’s support article says that for Wi-Fi-only setups, the mower should be moved close to the router during connection. If the network does not appear in the list, restart the mower and try again nearer the router.
Wi-Fi band and router settings
The most common cause of a failed Wi-Fi setup is the network band. Husqvarna’s support article lists the mower’s Wi-Fi as 2.4 GHz only. A router that broadcasts only 5 GHz will not work, and some routers need the 2.4 GHz band turned on in their settings. Check the router’s admin page before you assume the mower is faulty. If this point matters for your setup, read our Worx Landroid connection fixes for more detail on it.
Coverage matters too. A mesh node or access point near the lawn can help, but a weak link makes the app slow or unreliable. Our reading is that a clear Wi-Fi signal at the dock is the first thing to test, because the dock is where the mower reconnects after a return.

What the app does when the link drops
The mower’s behavior depends on how it is connected. Husqvarna’s support article describes three cases. For a Wi-Fi-only EPOS setup through Husqvarna Cloud, the mower stops mowing, searches for a signal, and shows an error if the connection is not recovered. For a Wi-Fi-only setup using a reference station or boundary wire, the mower keeps mowing on schedule but you lose remote access from the app. For models with Wi-Fi plus a mobile connection, the mower can switch to the mobile network and continue. For a closely related angle, see our what the offline mower app message means as well. See our robot mower Wi-Fi that keeps dropping for further detail on a connected question.
This is why a dead app is not always a broken mower. If remote control stops but the mower is still mowing on its schedule, the issue is the app link, not the cutting system.
Heads up
If the mower stops mowing when Wi-Fi drops, check the router first. Do not switch the mower’s setting until you know which connection type it uses.
Login, PIN and firmware problems
Husqvarna’s steps for setup ask you to log in to the Automower Connect app before starting, and to enter the mower’s PIN in the settings menu. A wrong PIN is a common reason setup fails even when the Wi-Fi details are right. Our reading is that you should write the PIN down when you first set up the mower, because recovery is slower than entering it correctly the first time. Beyond this topic, you can also read our Husqvarna Automower 430X firmware update steps for an adjacent part of owning a robot mower.
Two other fixes come up often. First, restart the Automower Connect app and try again. Second, check that the mower and the app are both up to date. Husqvarna’s support steps say to use the latest app version and to confirm the mower has the latest firmware installed. Firmware steps differ by model, so use the manual or support center for your exact mower.

Model and feature checks before you blame the app
Not every Husqvarna model has the same connectivity. Husqvarna says Automower Connect is standard on some professional and X-line models and optional on some 300 and 400 series models. If a feature you expected is missing, such as remote control or a mobile data option, check the model’s product page before you spend time on troubleshooting. This also applies to the Husqvarna 415X, whose connectivity options should be confirmed on its own page, since model variants can differ.
Voice control is another point of confusion. Husqvarna’s Automower Connect page lists Google Assistant and Amazon Alexa as supported, and says Siri is not. If you expected Siri control, that is a platform limit rather than a fault in the app.
When to contact support
- The app still shows the mower offline after you have confirmed the 2.4 GHz band and the router is in range.
- The PIN is correct, but setup keeps failing at the same step.
- The mower reports an error that the manual does not explain.
Have the model, the serial number from the mower, the app version, your router band and the exact error text ready. Support can work faster with those details.
Related reads: Another connected page that readers often open next is our Husqvarna reset instructions.
Frequently asked questions
Why does the Husqvarna Automower app say the mower is offline?
Common causes are a Wi-Fi network the mower cannot reach, a router set to 5 GHz only, or an app that is out of date. Check Bluetooth on the phone and confirm the router broadcasts 2.4 GHz before you assume a mower fault.
Does the Husqvarna app work over Bluetooth only?
Bluetooth covers setup and nearby control. Remote control from anywhere needs Wi-Fi or a mobile connection, and not every model includes one. Check the model’s connectivity before you buy.
Can I use Siri with the Husqvarna Automower app?
Husqvarna’s Automower Connect page lists Google Assistant and Amazon Alexa as supported and says Siri is not. Check the assistant you use before you rely on voice control.
What should I do if the Wi-Fi password is correct but setup still fails?
Confirm the network is 2.4 GHz, move the mower closer to the router, restart the mower, and enter the mower’s PIN again. If the same step still fails, contact Husqvarna support with the model and error text.
Sources
- How to connect your Automower to Wi-Fi (Husqvarna support): 2.4 GHz requirement, reconnect steps, PIN and app update advice, behavior when Wi-Fi drops.
- Automower Connect (Husqvarna): Bluetooth role, Wi-Fi and mobile options, voice assistant support, model availability.
01Up next9 min readLearnHusqvarna Automower Guide Wire Problem: How to Diagnose and Fix ItUpdated Nov 10, 2026
028 min readLearnHusqvarna Automower No Loop Signal: Causes and FixesUpdated Nov 11, 2026
037 min readLearnHusqvarna Automower Factory Reset: Steps for Newer and Older ModelsUpdated Nov 13, 2026
048 min readLearnHusqvarna Automower Not Charging: What to Check FirstUpdated Nov 13, 2026
057 min readLearnHusqvarna Automower Customer Service: How to Get HelpUpdated Nov 13, 2026
068 min readLearnHow Long Does the Husqvarna Automower 430X Battery Last?Updated Nov 12, 2026